mic-500a,

Features

• Microprocessor-based line interactive design
• Pure sine wave output
• User-friendly and easy-shift LCD display
• Rack / Tower design
• Built-in boost and buck AVR to stabilize voltage fluctuations
• Output power factor 0.8
• Hot-swappable battery design
• Programmable power management outlets
• ECO operation for energy saving (Efficiency Corrective Optimizer)
• Emergency Power Off Function (EPO)
• Long-run models available
• USB communication port with power management software and monitor UPS status
• RS-232 port supports SNMP adapter for remote monitoring & control
  
  read more

Features

• 750 VA ~ 2000 VA true sine wave UPS
• Built-in smart charger (6 hours to 90% charged)
• Charging ability at low input voltage (2 times more powerful than others).
• Smart microprocessor control guarantees high reliability.
• Boost and buck AVR for voltage stabilization.
• Off-mode auto charging.
• Cold start function (DC power on).
• Perfect power protection for servers, point-of-sale and work stations.
• RJ-11 / 45 internet & network protection.
• Built-in USB & RS-232 communication port.
• Support external SNMP adapter for remote monitoring.

Features

• 750 VA ~ 2000 VA true sine wave UPS
• Built-in smart charger (6 hours to 90% charged)
• Charging ability at low input voltage (2 times more powerful than others).
• Smart microprocessor control guarantees high reliability.
• Boost and buck AVR for voltage stabilization.
• Off-mode auto charging.
• Cold start function (DC power on).
• Perfect power protection for servers, point-of-sale and work stations.
• RJ-11 / 45 internet & network protection.
• Built-in USB & RS-232 communication port.
• Support external SNMP adapter for remote monitoring.

Features

• True double-conversion technology with high adaptability.
• 0.9 output power factor.
• High efficiency mode (ECO mode), η > 97%.
• DSP controlled for advance maintenance.
• Generator compatible and pure sine wave output.
• Programmable LCD display.
• Wide input voltage (110V - 300V).
• Input THDi < 5% and Output THDv < 1%.
• Frequency converter mode.
• Recharge to 90% battery capacity within 4 hours.
• Built-in RS-232 & HID USB communication and software can be downloaded from website.
• Emergency Power Off function (EPO).
• External battery bank connector (Optional).
• Built-in intelligent slot allows to install optional AS400 or SNMP card
  read more

Features

• True double-conversion technology with high adaptability.
• 0.9 output power factor.
• High efficiency mode (ECO mode), η > 97%.
• DSP controlled for advance maintenance.
• Generator compatible and pure sine wave output.
• Programmable LCD display.
• Wide input voltage (110V - 300V).
• Input THDi < 5% and Output THDv < 1%.
• Frequency converter mode.
• Recharge to 90% battery capacity within 4 hours.
• Built-in RS-232 & HID USB communication and software can be downloaded from website.
• Emergency Power Off function (EPO).
• External battery bank connector (Optional).
• Built-in intelligent slot allows to install optional AS400 or SNMP card
  read more

Features

• True double conversion pure sine wave output.
• DSP technology guarantees high performance
• Wide input voltage range (110V - 300Vac).
• Active power factor correction in all phases.
• Built-in phase auto adapt function simplifies wire installation.
• 50Hz / 60Hz frequency converter mode.
• ECO mode operation for energy saving.
• Programmable power management outlets.
• Emergency power off function (EPO).
• Generator compatible.
• SNMP + USB + RS-232 multiple communications.
• AC input/output phase can be setting to 1/1 by factory.
• Optional isolation transformer available.
• Pure sine wave output.
• Optional N+X parallel.
  read more

Features

• True double-conversion technology
  True double conversion UPS provides clean, high quality power, ideal for sensitive applications. When the utility is lost accidentally, the UPS system will use the power from battery to output without interruption.
• DSP control guarantees high performance
  DSP control technology greatly reduces harmonic distortion in non-linear loads without manual intervention for advanced maintenance.
• Active power factor correction in all phases
  By cancelling input current harmonics, the harmful effects of harmonic injection into the power network is eliminated. Lower power losses would result in reduced consumption and lower operation and maintenance costs.

20kVA 360/380/400/415V 3-Phase Wye Online UPS, ULT-P20K33HV

Capacity: 20000VA / 20000W (20kVA / 20kW)

Topology: Online double-conversion

Wave Form: Sine wave

Voltage & Configuration: 208/360V, 220/380V, 230/400Vac, or 240/415V 3-phase Wye

Features

• DSP-controlled technology
• Active power factor correction in all phases
• 1.0 power factor
• High overload threshold
• ECO Mode & EPO function
• 50/60Hz frequency converter
• Built-in MBS
• Option to parallel up to 6 units
• Option to add an isolation transformer

Features

• Online Double conversion technology.
• DSP technology guarantees high performance.
• Pure sine wave output.
• 1.0 output power factor.
• High efficiency up to 94%.
• 3-Stage extendable charging design for optimized battery performance
• Generator compatible.
• Wide input voltage range (110-300 VAC).
• 0.99 active input power factor correction.
• 50/60 Hz frequency converter mode.
• Emergency power off function (EPO).
• Build-in maintenance bypass switch.
• Optional N + X parallel redundancy.
• Optional OVCD ( over voltage cut-off device) protection.

Features

• Online Double conversion technology.
• DSP technology guarantees high performance.
• Pure sine wave output.
• 1.0 output power factor.
• High efficiency up to 94%.
• 3-Stage extendable charging design for optimized battery performance
• Generator compatible.
• Wide input voltage range (110-300 VAC).
• 0.99 active input power factor correction.
• 50/60 Hz frequency converter mode.
• Emergency power off function (EPO).
• Build-in maintenance bypass switch.
• Optional N + X parallel redundancy.
• Optional OVCD ( over voltage cut-off device) protection.

10KVA Online UPS, ULT-W10K

• True double-conversion technology
• Microprocessor control optimizes reliability
• Input power factor correction
• Wide input voltage (110 ~ 300 VAC)
• Output power factor 0.9
• Emergency Power Off (EPO) function
• Charger capacity expandable up to 6 A
• USB or RS-232 smart port for power management software
• Intelligent communication slot enables remote monitoring
• Comprehensive display allows easy monitoring and access of UPS status
• Maintenance bypass switch (Optional)
• Frequency converter mode available
• Generator compatible