avr-800va,

  • Smart Power Series

    Smart Power SeriesFeatures

    • 1000VA~5000VA pure sine waver invereter.
    • Optional 50A internal PWM solar charge controller.
    • Selectable input voltage range for home appliances and personal computers.
    • Selectable charging current based on applications.
    • Configurable AC/solar input priority via LCD setting.
    • Compatible to mains voltage or generator power.
    • Auto restart while AC is recovering.
    • Overload and short circuit protection.
    • Smart battery charger design for optimized battery performance.
    • Cold start function.
    • Parallel operation with up to 4 units only available for INV-SP4000/SP5000.
    read more
  • Smart Power Series

    Smart Power SeriesFeatures

    • 1000VA~5000VA pure sine waver invereter.
    • Optional 50A internal PWM solar charge controller.
    • Selectable input voltage range for home appliances and personal computers.
    • Selectable charging current based on applications.
    • Configurable AC/solar input priority via LCD setting.
    • Compatible to mains voltage or generator power.
    • Auto restart while AC is recovering.
    • Overload and short circuit protection.
    • Smart battery charger design for optimized battery performance.
    • Cold start function.
    • Parallel operation with up to 4 units only available for INV-SP4000/SP5000.
    read more
  • SmartNet R/T Series

    Smart NetFeatures

    • Microprocessor-based line interactive design
    • Pure sine wave output
    • User-friendly and easy-shift LCD display
    • Rack / Tower design
    • Built-in boost and buck AVR to stabilize voltage fluctuations
    • Output power factor 0.8
    • Hot-swappable battery design
    • Programmable power management outlets
    • ECO operation for energy saving (Efficiency Corrective Optimizer)
    • Emergency Power Off Function (EPO)
    • Long-run models available
    • USB communication port with power management software and monitor UPS status
    • RS-232 port supports SNMP adapter for remote monitoring & control
      read more
  • SmartNet R/T Series

    Smart NetFeatures

    • Microprocessor-based line interactive design
    • Pure sine wave output
    • User-friendly and easy-shift LCD display
    • Rack / Tower design
    • Built-in boost and buck AVR to stabilize voltage fluctuations
    • Output power factor 0.8
    • Hot-swappable battery design
    • Programmable power management outlets
    • ECO operation for energy saving (Efficiency Corrective Optimizer)
    • Emergency Power Off Function (EPO)
    • Long-run models available
    • USB communication port with power management software and monitor UPS status
    • RS-232 port supports SNMP adapter for remote monitoring & control
      read more
  • SmartNet UPS Series

    2U-3UFeatures

    • 750 VA ~ 2000 VA true sine wave UPS
    • Built-in smart charger (6 hours to 90% charged)
    • Charging ability at low input voltage (2 times more powerful than others).
    • Smart microprocessor control guarantees high reliability.
    • Boost and buck AVR for voltage stabilization.
    • Off-mode auto charging.
    • Cold start function (DC power on).
    • Perfect power protection for servers, point-of-sale and work stations.
    • RJ-11 / 45 internet & network protection.
    • Built-in USB & RS-232 communication port.
    • Support external SNMP adapter for remote monitoring.
    read more
  • SmartNet UPS Series

    2U-3UFeatures

    • 750 VA ~ 2000 VA true sine wave UPS
    • Built-in smart charger (6 hours to 90% charged)
    • Charging ability at low input voltage (2 times more powerful than others).
    • Smart microprocessor control guarantees high reliability.
    • Boost and buck AVR for voltage stabilization.
    • Off-mode auto charging.
    • Cold start function (DC power on).
    • Perfect power protection for servers, point-of-sale and work stations.
    • RJ-11 / 45 internet & network protection.
    • Built-in USB & RS-232 communication port.
    • Support external SNMP adapter for remote monitoring.
    read more
  • Tacoma HT Series

    TacomaFeatures

    • True double-conversion technology with high adaptability.
    • 0.9 output power factor.
    • High efficiency mode (ECO mode), η > 97%.
    • DSP controlled for advance maintenance.
    • Generator compatible and pure sine wave output.
    • Programmable LCD display.
    • Wide input voltage (110V - 300V).
    • Input THDi < 5% and Output THDv < 1%.
    • Frequency converter mode.
    • Recharge to 90% battery capacity within 4 hours.
    • Built-in RS-232 & HID USB communication and software can be downloaded from website.
    • Emergency Power Off function (EPO).
    • External battery bank connector (Optional).
    • Built-in intelligent slot allows to install optional AS400 or SNMP card
      read more
  • Tacoma HT Series

    TacomaFeatures

    • True double-conversion technology with high adaptability.
    • 0.9 output power factor.
    • High efficiency mode (ECO mode), η > 97%.
    • DSP controlled for advance maintenance.
    • Generator compatible and pure sine wave output.
    • Programmable LCD display.
    • Wide input voltage (110V - 300V).
    • Input THDi < 5% and Output THDv < 1%.
    • Frequency converter mode.
    • Recharge to 90% battery capacity within 4 hours.
    • Built-in RS-232 & HID USB communication and software can be downloaded from website.
    • Emergency Power Off function (EPO).
    • External battery bank connector (Optional).
    • Built-in intelligent slot allows to install optional AS400 or SNMP card
      read more
  • Ultima 31 Series

    Ultima31Features

    • True double conversion pure sine wave output.
    • DSP technology guarantees high performance
    • Wide input voltage range (110V - 300Vac).
    • Active power factor correction in all phases.
    • Built-in phase auto adapt function simplifies wire installation.
    • 50Hz / 60Hz frequency converter mode.
    • ECO mode operation for energy saving.
    • Programmable power management outlets.
    • Emergency power off function (EPO).
    • Generator compatible.
    • SNMP + USB + RS-232 multiple communications.
    • AC input/output phase can be setting to 1/1 by factory.
    • Optional isolation transformer available.
    • Pure sine wave output.
    • Optional N+X parallel.
      read more
  • Ultima 31 Series

    Ultima31Features

    • True double conversion pure sine wave output.
    • DSP technology guarantees high performance
    • Wide input voltage range (110V - 300Vac).
    • Active power factor correction in all phases.
    • Built-in phase auto adapt function simplifies wire installation.
    • 50Hz / 60Hz frequency converter mode.
    • ECO mode operation for energy saving.
    • Programmable power management outlets.
    • Emergency power off function (EPO).
    • Generator compatible.
    • SNMP + USB + RS-232 multiple communications.
    • AC input/output phase can be setting to 1/1 by factory.
    • Optional isolation transformer available.
    • Pure sine wave output.
    • Optional N+X parallel.
      read more
  • Ultima 33 Series

    Ultima 33Features

    • True double-conversion technology
      True double conversion UPS provides clean, high quality power, ideal for sensitive applications. When the utility is lost accidentally, the UPS system will use the power from battery to output without interruption.
    • DSP control guarantees high performance
      DSP control technology greatly reduces harmonic distortion in non-linear loads without manual intervention for advanced maintenance.
    • Active power factor correction in all phases
      By cancelling input current harmonics, the harmful effects of harmonic injection into the power network is eliminated. Lower power losses would result in reduced consumption and lower operation and maintenance costs.
    read more
  • Ultima 33 Series

    Ultima 33Features

    • True double-conversion technology
      True double conversion UPS provides clean, high quality power, ideal for sensitive applications. When the utility is lost accidentally, the UPS system will use the power from battery to output without interruption.
    • DSP control guarantees high performance
      DSP control technology greatly reduces harmonic distortion in non-linear loads without manual intervention for advanced maintenance.
    • Active power factor correction in all phases
      By cancelling input current harmonics, the harmful effects of harmonic injection into the power network is eliminated. Lower power losses would result in reduced consumption and lower operation and maintenance costs.
    read more
  • Ultima Plus Series

    Ultima PlusFeatures

    • Online Double conversion technology.
    • DSP technology guarantees high performance.
    • Pure sine wave output.
    • 1.0 output power factor.
    • High efficiency up to 94%.
    • 3-Stage extendable charging design for optimized battery performance
    • Generator compatible.
    • Wide input voltage range (110-300 VAC).
    • 0.99 active input power factor correction.
    • 50/60 Hz frequency converter mode.
    • Emergency power off function (EPO).
    • Build-in maintenance bypass switch.
    • Optional N + X parallel redundancy.
    • Optional OVCD ( over voltage cut-off device) protection.

     

    read more
  • Ultima Plus Series

    Ultima PlusFeatures

    • Online Double conversion technology.
    • DSP technology guarantees high performance.
    • Pure sine wave output.
    • 1.0 output power factor.
    • High efficiency up to 94%.
    • 3-Stage extendable charging design for optimized battery performance
    • Generator compatible.
    • Wide input voltage range (110-300 VAC).
    • 0.99 active input power factor correction.
    • 50/60 Hz frequency converter mode.
    • Emergency power off function (EPO).
    • Build-in maintenance bypass switch.
    • Optional N + X parallel redundancy.
    • Optional OVCD ( over voltage cut-off device) protection.

     

    read more

Login

contact us

10, El Mosheer Ahmed Ismail Str., Sidi Gaber
Alexandria,
Egypt

Call Us: +203 541.0172

Delivery Outside Alexandria

  • For delivery outside Alexandria,
         Please contact: 011 111 13029.